Surface:

100mm faders with PFL overpress

Six surface layers

Built-in talkback microphone

Stereo headphone output

Processing:

Up to 300 DSP paths

Up to 180 input channels

4 x main outputs (mono, stereo or 5.1)

8 x audio sub-groups (mono, stereo or 5.1)

32 x track outputs (mono or stereo)

16 x auxiliary outputs (mono or stereo)

1 x direct output per channel* (pre EQ, pre fader or post fader)

1 x mix minus output per channel* (can be fed from auto minus, auxes, tracks or off Air conference bus)

1 x auto minus bus

1 x off air conference bus

1 x insert on every channel, group, main and console monitor output

152 x external monitor and meter inputs

4 x Automixers, each controlling an unlimited number of mono paths

Unlimited VCA groups

6-band parametric EQ on every channel, group, main

Dynamics processing on every channel, main, group, aux and track (2 x compressor/limiter, expander, gate, sidechain EQ/filters)

2.73s of delay within every channel, group, main, aux and track

An additional pool of 128 legs of assignable input delay (2.73s each)

An additional pool of 128 legs of assignable output delay (2.73s each)

5.1 console monitor output (with dedicated small LS and PFL/RTB outputs)

3 x 5.1 studio monitor outputs

Advanced Autofader (AFV) functionality on all faders

* From a pool of 188 mono resources shared between direct outputs and mix minus outputs.

Networking:

Integral 4096² router

8 redundant router connections for networking consoles and connecting I/O boxes

All I/O provided over Hydra2 network via a wide range of I/O formats

Cat5e or fiber connectivity

Resilience:

Highly resilient. PSU, DSP, control processor and router Modules are hot-swappable and have automatic redundancy

Independent DSP operation ensures audio continuity in the event of a surface reset

Low power consumption and low heat generation

Note: Professionally maintained and teched prior to shipment.